Description
Nice Robus 600 Sliding Gate Motor Kit — Professional Sliding Gate Automation (600kg)
The Nice Robus 600 Sliding Gate Motor Kit is a 24V DC sliding gate operator designed for residential and light-commercial applications, featuring a built-in control unit and OXI plug-in receiver. Engineered for gates up to 600 kg, the ROBUS600 delivers reliability, high performance, and seamless integration with modern automation systems.
A high-quality Italian-designed system, the ROBUS600 offers six adjustable speeds (up to 340 mm/s), enabling a 3-metre gate to open in approximately 10 seconds. The low-voltage 24VDC motor allows the use of optional battery backup, making it ideal for sites with unreliable mains power. Using NICE’s BlueBUS two-wire system, installers can easily integrate photocells, keypads, RFID readers, or synchronise two motors for bi-parting sliding gates — all on a simplified wiring architecture.
If mains power access is difficult, the unit is compatible with the NICE Low Voltage Power Box or solar power options, providing flexibility for complex site conditions.
High-Speed Automation
The Nice Robus 600 Sliding Gate Motor Kit delivers fast and efficient operation, opening gates up to 4 metres wide in around 10 seconds, improving traffic flow and safety.
For customers requiring even faster operation, consider the NICE ROBUS600HS High-Speed Kit.
The updated motor and control unit also feature extended integration options for modern Smart Home systems. Using the MyNice Pro App, installers can wirelessly configure settings, perform diagnostics, and update parameters remotely, increasing efficiency and reducing service time.
Product Kit Contents
-
1 × ROBUS600 Gate Motor with built-in control unit & OXI receiver
-
2 × INTI2 Transmitters
-
4 × 1-Metre Gear Rack (Track)
The Nice Robus 600 Sliding Gate Motor Kit is fully compatible with Fibaro Home Center 3 and Home Center 3 Lite.
User-Friendly
-
NICE BlueBUS technology allows the connection of up to 7 pairs of photocells, safety, control, and signalling accessories — all using only two wires.
Practical
-
The control unit and optional PS124 buffer batteries connect via a guided connector and can be housed directly inside the motor for clean and compact installation.
Advanced
-
Built-in temperature sensor automatically adjusts motor power according to climate conditions and provides thermal protection.
-
Master/Slave mode enables synchronisation of two motors for bi-parting sliding gates.
Intelligent
-
Obstacle detection, automatic travel learning, and eight programmable operating levels.
-
Self-diagnosis capability with flashing-light signalling for troubleshooting.
Safe
-
Adjustable soft start and soft stop, plus configurable acceleration and deceleration at every cycle.
Sturdy
-
Pressure die-cast base and manual release mechanism with an easy-access handle.
Silent
-
High-quality gear motor mounted on bearings for smooth and quiet operation.
-
Obstacle detection system
-
Enhances property security
-
Quiet operation
-
Self-diagnosis with visual alerts
-
Automatic programming of travel limits
-
Temperature-adaptive motor performance
-
Six configurable speed settings (soft start/stop)
-
Optional battery backup
-
Adjustable auto-close timer (5–180 seconds) — photocells recommended
Technical Specifications
Specification Value Product Name RB600 (Nice Robus 600 Sliding Gate Motor Kit) Power Supply 230V AC (50/60 Hz) Motor Voltage 24V DC Gate Speed 0.34 m/s Max Gate Weight 600 kg Torque 400 Nm Protection Rating IP44 Operating Temperature –20°C to +50°C Motor Weight 8 kg Dimensions 330 × 195 × 277 mm Maintenance Requirements
Nice Robus 600 Sliding Gate Motor Kit require minimal maintenance, but the following should be carried out annually:
1. Internal Motor Check
-
Remove the lid and inspect for insects, ants, or vermin.
-
Clean out any debris and seal entry gaps with silicone.
-
Place insect repellent around the motor housing.
2. Rack Alignment
-
Inspect rack contact while opening/closing the gate.
-
Ensure ~1 mm clearance between rack and pinion.
-
If noise occurs, internal gears may require cleaning, regreasing, or bearing replacement.
3. Battery Backup Test (if installed)
-
Disconnect mains power and operate the motor on battery power.
-
Replace battery if motor slows, stops unexpectedly, or reverses incorrectly.
-
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.